Field application bulliten pm700-1

Carver Pro Equipment Discussions and Questions
Post Reply

Field application bulliten pm700-1

Post by jan9043 » Fri Jan 18, 2013 5:05 pm

I am looking for “Field Application Bulletin pm700-1” for instructions on the procedure to modify my pm950 for parallel mono operation. Any assistance in this matter would be greatly appreciated

User avatar
M-400t CUBE
Posts: 198
Joined: Thu Feb 20, 2014 8:45 am
Location: East Virginia

Re: Field application bulliten pm700-1

Post by fill35U » Mon Feb 24, 2014 11:56 am

I don't have a PM950, and I can't find the PM700-1 bulletin. But I would *guess*:

1. Configure the amp for Dual Mono per the owner's manual (I believe that means remove the input module, and set the "Dual Mono" switch appropriately).

2. "Strap" the two red/+ outputs together, with the same size wire you're using for speaker cable. Probably a good idea to do the same for the black/- outputs as well.

3. Connect your load between the red and black outputs.

My apologies if that's not new information to you. Hope it helps! And please let us know how it turns out, or if you ever found that bulletin!
Living room system: TGP IV, TX-8r, TD-1400, PT-2400(x6), PM-1.5a(x3), TFM-45(x2), TFM-55, Silver Amazings Mk IV

Spares/projects: C-9, M-400, PM-350(x2), M-1.5t(x2), PT-2400(x2-1/2), PT-1800(x4), TGP I, Architectural True Sub, pm420

Post Reply

Return to “Carver Pro”