FAQ  •  Register   •  Gallery •  Login

It is currently Fri Apr 18, 2014 3:04 am

Field application bulliten pm700-1

<<

jan9043

Post Fri Jan 18, 2013 5:05 pm

Field application bulliten pm700-1

I am looking for “Field Application Bulletin pm700-1” for instructions on the procedure to modify my pm950 for parallel mono operation. Any assistance in this matter would be greatly appreciated
<<

fill35U

User avatar

Newbie 50+

Posts: 64

Joined: Thu Feb 20, 2014 8:45 am

Location: East Virginia

Post Mon Feb 24, 2014 11:56 am

Re: Field application bulliten pm700-1

I don't have a PM950, and I can't find the PM700-1 bulletin. But I would *guess*:

1. Configure the amp for Dual Mono per the owner's manual (I believe that means remove the input module, and set the "Dual Mono" switch appropriately).

2. "Strap" the two red/+ outputs together, with the same size wire you're using for speaker cable. Probably a good idea to do the same for the black/- outputs as well.

3. Connect your load between the red and black outputs.

My apologies if that's not new information to you. Hope it helps! And please let us know how it turns out, or if you ever found that bulletin!
Current setup: Random Naked Amps Piled on Floor and/or Wedged Into Shelves

Don't call amp mutilators "butchers"- butchers are highly skilled professionals.

Return to Carver Pro

Who is online

Users browsing this forum: No registered users and 1 guest

cron
Powered by phpBB © 2011 phpBB Group.