FAQ  •  Register   •  Gallery •  Login

It is currently Sat Aug 01, 2015 3:18 pm

Anaconda Speaker Cables

<<

Toy Maker

User avatar

Puppet Master

Posts: 6703

Joined: Wed Oct 08, 2003 1:26 am

Post Wed Nov 05, 2008 4:44 pm

Anaconda Speaker Cables

Well the cable came in, and I had just enough of the nylon braiding left from one of my model projects. The connectors should be in from China by the end of the week I hope, and I still need to get some 1/2" and 1" heatshrink.

These are worthy of being connected to the Lightstar amps.
Each finished cable will weight about 25 pounds.

Image
CHOOSE YOUR OPTION... THEN CLICK THE BUTTON BELOW
**SPEAKER SET - 2ND CHANCE OFFER**


CHOOSE YOUR OPTION... THEN CLICK THE BUTTON BELOW
SPEAKER STANDS - PICK UP / SHIP
<<

engtaz

User avatar

"TAZ"

Posts: 5320

Joined: Sat Jun 30, 2007 1:43 pm

Location: Tampa, FL

Post Wed Nov 05, 2008 4:48 pm

Re: Anaconda Speaker Cables

:shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock:
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
<<

stevewithrow

User avatar

SILVER-7t

Posts: 1327

Joined: Mon Aug 25, 2008 12:59 am

Location: Great NorthWest.....Carver Country..

Post Wed Nov 05, 2008 4:49 pm

Re: Anaconda Speaker Cables

=D> =D> =D> =D> =D> =D> =D> =D>
<<

HRDROKN

User avatar

TFM-45

Posts: 533

Joined: Sun Nov 02, 2008 10:04 pm

Location: Northern California

Post Wed Nov 05, 2008 6:49 pm

Re: Anaconda Speaker Cables

Dang it! How much does that stuff go per/ft. ?

:shock:
HRDROKN
MC-7P tube preanp, BBE2002R, Marchand XM44, TFM-35x .002, TFM-35x, M1.0t MKII .002, M500t, Silver 7t's, SDA-360 and Klipsch KLF-30's w/crites crossovers...
<<

Toy Maker

User avatar

Puppet Master

Posts: 6703

Joined: Wed Oct 08, 2003 1:26 am

Post Wed Nov 05, 2008 10:01 pm

Re: Anaconda Speaker Cables

about $3 a foot
CHOOSE YOUR OPTION... THEN CLICK THE BUTTON BELOW
**SPEAKER SET - 2ND CHANCE OFFER**


CHOOSE YOUR OPTION... THEN CLICK THE BUTTON BELOW
SPEAKER STANDS - PICK UP / SHIP
<<

TNRabbit

User avatar

(pair of) SILVER-7 TUBE AMPs

Posts: 13491

Joined: Sun Jan 14, 2007 11:53 am

Location: TN Native Languishing in VA

Post Thu Nov 06, 2008 3:27 am

Re: Anaconda Speaker Cables

"Each finished cable will weight about 25 pounds."

GREAT GOOGAMOOGA! That'll cost as much to ship as a Sunfire amp!
TNRabbit
Image

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.

Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)

OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"

RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
<<

Toy Maker

User avatar

Puppet Master

Posts: 6703

Joined: Wed Oct 08, 2003 1:26 am

Post Thu Nov 06, 2008 11:26 pm

Re: Anaconda Speaker Cables

TNRabbit wrote:"Each finished cable will weight about 25 pounds."

GREAT GOOGAMOOGA! That'll cost as much to ship as a Sunfire amp!


Image
CHOOSE YOUR OPTION... THEN CLICK THE BUTTON BELOW
**SPEAKER SET - 2ND CHANCE OFFER**


CHOOSE YOUR OPTION... THEN CLICK THE BUTTON BELOW
SPEAKER STANDS - PICK UP / SHIP
<<

Toy Maker

User avatar

Puppet Master

Posts: 6703

Joined: Wed Oct 08, 2003 1:26 am

Post Thu Nov 13, 2008 8:09 am

Re: Anaconda Speaker Cables

Hong Kong must be pretty far away huh ....
It took long enough for the banana/spade connectors to show up.

Too bad no one makes a 4ga banana/spade connector.
I have to drill out the connector, and silver solder the cables in instead of using the supplied set screws.
Once I drill out the connector, there isn't enough meat left for the set screws to get a good enough bite.

No big deal really. I was thinking about having a custon connector made, but not this time around... maybe later.

Image

Image
CHOOSE YOUR OPTION... THEN CLICK THE BUTTON BELOW
**SPEAKER SET - 2ND CHANCE OFFER**


CHOOSE YOUR OPTION... THEN CLICK THE BUTTON BELOW
SPEAKER STANDS - PICK UP / SHIP
<<

engtaz

User avatar

"TAZ"

Posts: 5320

Joined: Sat Jun 30, 2007 1:43 pm

Location: Tampa, FL

Post Thu Nov 13, 2008 11:47 am

Re: Anaconda Speaker Cables

:shock:
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
<<

gdb

User avatar

SILVER-7t

Posts: 1710

Joined: Fri Apr 04, 2008 5:43 pm

Location: Central Maryland

Post Thu Nov 13, 2008 3:20 pm

Re: Anaconda Speaker Cables

Toy Maker wrote:Hong Kong must be pretty far away huh ....
It took long enough for the banana/spade connectors to show up.

Too bad no one makes a 4ga banana/spade connector.
I have to drill out the connector, and silver solder the cables in instead of using the supplied set screws.
Once I drill out the connector, there isn't enough meat left for the set screws to get a good enough bite.

No big deal really. I was thinking about having a custon connector made, but not this time around... maybe later.

Image

Image

Aren't you equipped to CNC mill some from gold billets?? :-k :lol:
<<

Toy Maker

User avatar

Puppet Master

Posts: 6703

Joined: Wed Oct 08, 2003 1:26 am

Post Thu Nov 13, 2008 3:31 pm

Re: Anaconda Speaker Cables

Mill yes, lathe, no :(
CHOOSE YOUR OPTION... THEN CLICK THE BUTTON BELOW
**SPEAKER SET - 2ND CHANCE OFFER**


CHOOSE YOUR OPTION... THEN CLICK THE BUTTON BELOW
SPEAKER STANDS - PICK UP / SHIP
<<

maddmaxxx

User avatar

(Pair of Silver 9t's)

Posts: 2985

Joined: Wed Oct 27, 2004 6:18 pm

Location: the World We Skate Our 'Choppers' Thru

Post Fri Nov 14, 2008 5:26 pm

Re: Anaconda Speaker Cables

-y'know TM; ive been using 4guage, 1650 strand, super flexible, copper welding wire for years




























-on choppers 8)
-* © Küül ®™ /mx...
-Too hip gotta book
-"Don't BAN me Bro!"...el/doro
<<

HRDROKN

User avatar

TFM-45

Posts: 533

Joined: Sun Nov 02, 2008 10:04 pm

Location: Northern California

Post Fri Nov 14, 2008 5:30 pm

Re: Anaconda Speaker Cables

Toy Maker wrote:about $3 a foot


OK then.... do you have a link you want to share?

:-s
HRDROKN
MC-7P tube preanp, BBE2002R, Marchand XM44, TFM-35x .002, TFM-35x, M1.0t MKII .002, M500t, Silver 7t's, SDA-360 and Klipsch KLF-30's w/crites crossovers...
<<

Toy Maker

User avatar

Puppet Master

Posts: 6703

Joined: Wed Oct 08, 2003 1:26 am

Post Fri Nov 14, 2008 5:48 pm

Re: Anaconda Speaker Cables

not yet.... maybe after I get them done....
I can't give up all my secrets :-&

It's not welding cable... I thought about it, and did not like the look or feel of the shielding on it.
I got the 1st sample soldered in yesterday.

I have everything I need except for the braiding I want for the cables. I am thinking about using smaller braid on each cable, and then braiding the 4 together.

We braided the cables together the other night, and it looks really cool, and is MUCH more flexable this way. I keep thinking and changing my mind as I go.
CHOOSE YOUR OPTION... THEN CLICK THE BUTTON BELOW
**SPEAKER SET - 2ND CHANCE OFFER**


CHOOSE YOUR OPTION... THEN CLICK THE BUTTON BELOW
SPEAKER STANDS - PICK UP / SHIP
<<

HRDROKN

User avatar

TFM-45

Posts: 533

Joined: Sun Nov 02, 2008 10:04 pm

Location: Northern California

Post Fri Nov 14, 2008 10:18 pm

Re: Anaconda Speaker Cables

Toy Maker wrote:not yet.... maybe after I get them done....
I can't give up all my secrets :-&



Fair enough then..... so hurry up! :lol: :lol: :lol:

8)
HRDROKN
MC-7P tube preanp, BBE2002R, Marchand XM44, TFM-35x .002, TFM-35x, M1.0t MKII .002, M500t, Silver 7t's, SDA-360 and Klipsch KLF-30's w/crites crossovers...
Next

Return to CARVERaudio.com Products

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB © 2011 phpBB Group.