FAQ  •  Register   •  Gallery •  Login

It is currently Fri Nov 28, 2014 6:01 am

Carver AL-III Ribbon Repair Frustration

<<

AlexSauter

User avatar

Site Admin

Posts: 610

Joined: Sun Apr 13, 2008 5:41 pm

Location: Fort Myers FL

Post Thu Feb 02, 2012 1:28 pm

Re: Carver AL-III Ribbon Repair Frustration

sam046 wrote:I have two AL-III ribbons that need repair. I have called the number for James Sauter who is recommended on the Carver Site to no avail. I have repeatedly called and even sent a message, but no response. Does anyone have any updated info on where to get these repaired? I would even buy new ones if I could find them. Thanks in advance!



Hello Sam046,

I am sitting here next to James, all of his information is still the same. I will tell him to stop ignoring his phone, he has been doing that allot lately....
RIP BillD
BillD wrote:Well, some people are glass half empty people and some are glass half full. Being an engineer, I just think the glass is the wrong size.


My system (sitting in the garage):

(Stereo System)
Modified Carver AL III+'s (Pushed into the corners to make room for the ALS speakers)
Modified CarverFest 2011 20w tube amplifier
Carver Pro PT-1800
Sunfire Prototype TGA-2375
Carver TX-2 Tuner (not used)
Logitech Squeezebox (replaced Tuner & dad's CD player)
CARVERaudio Directional RCA interconnects
RCA-Headphone jack for iPod & iPhone
<<

TNRabbit

User avatar

(pair of) SILVER-7 TUBE AMPs

Posts: 13342

Joined: Sun Jan 14, 2007 11:53 am

Location: TN Native Languishing in VA

Post Thu Feb 02, 2012 1:31 pm

Re: Carver AL-III Ribbon Repair Frustration

Not to make excuses but I know they're covered up with making the new ALS speakers. I called and talked to james' son, Alex, just now. He said he would let James know.

EDIT: He beat me to it.....
TNRabbit
Image

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.

Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)

OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"

RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
<<

ribbonspeaker

Newbie

Posts: 27

Joined: Mon Mar 19, 2012 4:30 pm

Post Mon Mar 19, 2012 4:44 pm

Re: Carver AL-III Ribbon Repair Frustration

I was able to put back on the magnets in place and I am working on to rebuilt my 30 inch carver .

I have 5 .
2 60 inches and

3 with 30 inch .

Only one working .

I got the materials from ebay Mylar 6 micron the aluminum from Cosco food stand .

However, I have the hard time to glue the aluminum to the mylar and I have too many connection . It doesn't look to smooth.

I also use the material from Mycrolite ( use in airplane model). It is very messy because of the glue .

any help would be appreciated.

thank
<<

mbskeam

User avatar

SILVER-7t

Posts: 1987

Joined: Mon Jan 25, 2010 2:32 am

Location: Woodinville Wa

Post Mon Mar 19, 2012 8:33 pm

Re: Carver AL-III Ribbon Repair Frustration

Mbskeam


#1 BLACK BEAUTY's made by the man, the myth, the legend Bob Carver
CARVER: TFM-75, TFM-45(3), SD/A-490T
SUNFIRE: Tube pre
2 sets of ALS'3, set of SILVERS, set of PLATS
AUDIOCONTROL: phase coupled activator
KENWOOD: BASIC M2a (2)

“Youth ages, immaturity is outgrown, ignorance can be educated, and drunkenness sobered, but stupid lasts forever.”
― Aristophanes

The only thing I'll feel......will be the RECOIL
Necronomicon Ex-Mortis....... Klaatu Barada Nikkto
"We should seek the greatest value of our action"
<<

angelod307

SILVER-7 TUBE AMP

Posts: 2728

Joined: Sat Jun 06, 2009 10:56 pm

Location: manning, sc

Post Mon Mar 19, 2012 9:30 pm

Re: Carver AL-III Ribbon Repair Frustration

hello ribbonspeaker, welcome aboard. good luck for sure as the mylar replacement for the panels. i just had a 30" done by alex and james this past week. what james uses is manufactured and sold in a large quantity that is in the thousands when the sauters order a new batch. you have taken on a real undertaking i am sure to get it done in a small quantity. please keep us informed on how it comes out.

now on the other guy, if yours are the ribbons that were repaired while i was visiting, i think they are being sent out in the next day or so if they didn't go out today. they truely do remanufacture them as i am a first hand witness. good luck all.
CarverFest: I just go for the arts and crafts

Return to Carver Speakers

Who is online

Users browsing this forum: Yahoo [Bot] and 2 guests

Powered by phpBB © 2011 phpBB Group.