Re: Thank You Ed, Robert R. and Bob C.

12th Annual CARVERFEST 2018 September 5th - 19th
Post Reply
User avatar
Don
SILVER-7 TUBE AMP
Posts: 2712
Joined: Tue Oct 28, 2008 10:46 am

Re: Thank You Ed, Robert R. and Bob C.

Post by Don » Sat Feb 03, 2018 5:08 pm

Just wanted to take a minute to thank Ed for reaching out to Bob C. and agreeing to take on the responsibility to keep track of the incoming finances and to bring the quite numerous tube amp parts to CF. Remember what James and family went through a few years past. This is no small task.

Also, wish to thank Robert R. for agreeing to write up some assembly instructions and/or schematics and distribute to all of us.

Finally, Bob C. for agreeing to sell us another one of his" future classics" at such a reasonable price before he brings it to the market. :D

=D> =D> =D>
To argue with a person who has renounced the use of reason is like administering medicine to the dead.
— Thomas Paine


"Try not to become a man of success, but rather a man of value" Albert Einstein

"Politicians are the only people in the world who create problems and then campaign against them". Charlie Reese

"The problems we face today exist because the people who work for a living are outnumbered by those who vote for a living." Brad Shurett


"Kindness is a language that the Deaf can hear and the Blind can see." Mark Twain

RIP BILL D. RIP WRABBIT

User avatar
frenchguy
SILVER-7 TUBE AMP
Posts: 2809
Joined: Fri May 14, 2010 11:53 pm
Location: wisconsin

Re: Thank You Ed, Robert R. and Bob C.

Post by frenchguy » Sat Feb 03, 2018 5:27 pm

I couldnt agree more Don!! =D> =D> =D> =D> =D> 8) thats what CF is all about!! everyone chipping in to get things done!! =D> =D> 8)
2-Carver Crimson 275 vacuum tube amps,Carver C-1 tfm 42. ct-6 & ct-17, sda390t, jolida jd 100A. JBL L96 & JBL 4401,s W/Ribbon Tweeters, Carver Amazing Silver speakers in oak, Carver Cinema 5.1 subwoofer & Tesla audio Carverfest satellite ribbon speakers & stands & Douglas connection cables

User avatar
kingman
(pair of) SILVER-7 TUBE AMPs
Posts: 6436
Joined: Sun Nov 30, 2008 2:10 pm
Location: Upstate South Carolina

Re: Thank You Ed, Robert R. and Bob C.

Post by kingman » Sat Feb 03, 2018 6:40 pm

Claw_Applause.gif
Claw_Applause.gif (187.05 KiB) Viewed 865 times
In reality, it only matters what it sounds like to YOU!!!

User avatar
Magnaryder
SILVER-7 TUBE AMP
Posts: 3131
Joined: Fri Mar 09, 2007 1:00 am
Location: Bucyrus, Ohio

Re: Thank You Ed, Robert R. and Bob C.

Post by Magnaryder » Sat Feb 03, 2018 9:30 pm

Well said, Don!

ray
Magnaryder

Its going to be used equipment when I sell it, so it may as well be used equipment when I buy it.

"Racing is life, the rest of the time you're just sitting around."-Steve McQueen

kve777
Newbie
Posts: 36
Joined: Sat Jun 24, 2006 5:30 pm
Location: Wonderful South Jersey

Re: Thank You Ed, Robert R. and Bob C.

Post by kve777 » Sat Feb 03, 2018 9:41 pm

Here, here! =D>
Kevin

trav0810
el douché
el douché
Posts: 530
Joined: Tue Jan 29, 2013 10:55 am
Location: Indiana

Re: Thank You Ed, Robert R. and Bob C.

Post by trav0810 » Sun Feb 04, 2018 2:17 pm

Many thanks to all of you who have stepped up to help with this project!

User avatar
BarryG
Newbie 50+
Posts: 97
Joined: Thu Jul 24, 2014 4:00 am

Re: Thank You Ed, Robert R. and Bob C.

Post by BarryG » Sun Feb 04, 2018 3:16 pm

I would also like to thank everyone involved! This is a huge undertaking. I want you guys know your hard work is appreciated!

BarryG
Carver C-11 (BillD modified by Dennis Miller), Carver SD/A-390t, Carver C-9, Carver M-1.0t MKII Opt. 2, Carver M-500t MKII (RichP’s final MKII before retirement), Carver TFM-45, TEAC DAC, Tube Buffer (MusicFidelity Clone), Sony Blu-Ray Player, Technics SL-7 turntable with Technics 310MC moving coil cartridge, Polk SDA1B’s (upgraded and modded by me), Carver ALS (Original upgraded), Interconnects by Doug, Speaker Wires by Doug, Salamander Archetype Equipment rack X2.

User avatar
UncleMeat
TFM-25
Posts: 328
Joined: Thu May 21, 2015 5:32 pm

Re: Thank You Ed, Robert R. and Bob C.

Post by UncleMeat » Sun Feb 04, 2018 4:47 pm

YES, Many Thanks to Ed, Robert R. and Bob! =D> =D>

User avatar
MRHP
SILVER-7t
Posts: 1349
Joined: Wed Jan 18, 2012 2:36 pm
Location: Buzzard Creek Ky

Re: Thank You Ed, Robert R. and Bob C.

Post by MRHP » Sun Feb 04, 2018 4:53 pm

Yes thanks a million to those involved volunteering their time, effort and money that goes unnoticed behind the scenes. Its a lot of thankless work. Been there done that. Thanks!
TFM-75 serial #0001
PT-2400 serial #0001
Baby Black Magic serial #0001
Baby Black Magic serial #0002
Cherry/260wpc Mono Blocks
Lightstar Reference
Sunfire Series II 625x2
Carver 490t
OPPO-103
Lucas Labs CF-14
Sunfire Tube pre
DENON DP-62L TT
DUAL CS 5000 TT
DQ-20's
Tesla CF-15 speakers
Douglas Cables
OK ERIC, LET GO OF THE MOUSE AND BACK AWAY FROM YOUR PC WITH YOUR HANDS IN THE AIR. NOW SLOWLY LAY FACE DOWN ON THE FLOOR!!!! - Snoop65

User avatar
compwaco
Newbie
Posts: 17
Joined: Fri Aug 01, 2014 11:45 am
Location: The Mountains of Vermont

Re: Thank You Ed, Robert R. and Bob C.

Post by compwaco » Sun Feb 04, 2018 6:40 pm

A huge thanks to everyone helping make this come together. This is a wonderful opportunity and privilege. It will likely be my last "main" amp and I am very excited. :D

User avatar
AndrewJohn
Newbie
Posts: 5
Joined: Tue Sep 12, 2017 6:43 am
Location: St. Charles, IL

Re: Thank You Ed, Robert R. and Bob C.

Post by AndrewJohn » Sat Feb 24, 2018 8:29 am

Truly Awesome. Thank you from my corner of the Carver world.

User avatar
oldtexasdog
M-400t CUBE
Posts: 195
Joined: Wed Nov 17, 2010 8:28 pm
Location: North Texas

Re: Thank You Ed, Robert R. and Bob C.

Post by oldtexasdog » Sat Feb 24, 2018 9:18 am

Don't know how to say "Thank You" enough to all those making this happen! We are all in your debt.
There are two holes in Daddy's head where all the money goes.

User avatar
engtaz
"TAZ"
Posts: 5414
Joined: Sat Jun 30, 2007 1:43 pm
Location: Tampa, FL

Re: Thank You Ed, Robert R. and Bob C.

Post by engtaz » Sat Feb 24, 2018 10:12 am

Very well said Don. Yes I remember the 1st amp build vividly. Didn't wish those problems on anyone. Thanks again Ed, Robert and the great Bob for doing this.
engtaz


Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use

Post Reply

Return to “CARVERFEST 2018”