Need AL III crossover and plate with pots on it.
Need AL III crossover and plate with pots on it.
Need AL III crossover and plate with pots on it.
Thanks
Thanks
engtaz
Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
- BillD
- R.I.P. Friend
- Posts: 7126
- Joined: Wed Jun 06, 2007 8:29 pm
- Location: The west's most mid-western town, Scottsdale, Arizona
Re: Need AL III crossover and plate with pots on it.
I would think that Br'er Rabbit would be a likely source. You can probably find him hanging out in da brier patch.
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
- TNRabbit
- R.I.P. Friend
- Posts: 13360
- Joined: Sun Jan 14, 2007 11:53 am
- Location: TN Native Languishing in VA
- Contact:
Re: Need AL III crossover and plate with pots on it.
Sold mine to Angelo last month...
TNRabbit

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.
Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)
RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.
Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)
OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"
RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
Re: Need AL III crossover and plate with pots on it.
I thought so but keep a eye open for another one.
Thanks
Thanks
engtaz
Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
Carver M4.0T in front channels to Caver AL VI's in SACD & 2 Channel setup
C 16, PT 2400, Slim Device, Carver TX-8, 490T and Rega TT w Grado Gold cart in the 2 channel setup
Bogen SRB20 is computer amp
Carver PM-350 donated for youth church use
Re: Need AL III crossover and plate with pots on it.
I know someone with one - not sure if he will sell it but how much are you willing to pay and I can ask? its from a original AL III and not the plus model. He was saving it for a project but maybe he gave up, I will ask for you and check back.engtaz wrote:I thought so but keep a eye open for another one.
Thanks
BillD, You will be forever with us! RIP until we meet again on the other side...
-
- SILVER-7 TUBE AMP
- Posts: 2669
- Joined: Sat Jun 06, 2009 10:56 pm
- Location: manning, sc
Re: Need AL III crossover and plate with pots on it.
hey, if i find out the values of the crossover components, i will have a set for you. i have sourced new potentiometers for the panels, i just do not know the exact values of the capacitors and coils as of yet. when i find that out, i am going to rebuild mine, and have 4 extra panels. well maybe three if i make a custom center for the ht setup.
CarverFest: I just go for the arts and crafts
- BillD
- R.I.P. Friend
- Posts: 7126
- Joined: Wed Jun 06, 2007 8:29 pm
- Location: The west's most mid-western town, Scottsdale, Arizona
Re: Need AL III crossover and plate with pots on it.
Angelo, can't you read the capacitance on the caps? I know coils are a bit more of a problem.
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer
-
- SILVER-7 TUBE AMP
- Posts: 2669
- Joined: Sat Jun 06, 2009 10:56 pm
- Location: manning, sc
Re: Need AL III crossover and plate with pots on it.
some i can, others are a mystery. they have values on them like 7k. i think i am gonna just buy some meters that can read the values of capacitors and another for coils.BillD wrote:Angelo, can't you read the capacitance on the caps? I know coils are a bit more of a problem.
CarverFest: I just go for the arts and crafts
Re: Need AL III crossover and plate with pots on it.
I have two of them PM me.
Ray
Ray
- Attachments
-
- 100_1580.JPG (764.4 KiB) Viewed 2344 times
-
- 100_1579.JPG (947.07 KiB) Viewed 2344 times
- TNRabbit
- R.I.P. Friend
- Posts: 13360
- Joined: Sun Jan 14, 2007 11:53 am
- Location: TN Native Languishing in VA
- Contact:
Re: Need AL III crossover and plate with pots on it.
Wow; those look WAY different from mine...
TNRabbit

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.
Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)
RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.
Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)
OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"
RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.