FAQ  •  Register   •  Gallery •  Login

It is currently Tue Sep 02, 2014 11:42 pm

Carver M1.0t paired with a AV-705x

<<

EndersShadow

User avatar

TFM-45

Posts: 639

Joined: Thu Jun 30, 2011 3:58 pm

Location: Indiana

Post Sat May 26, 2012 4:47 pm

Carver M1.0t paired with a AV-705x

I am curious to hear the opinions of owners of the 1.0t amp. I am hoping to acquire one to run my LSi 15's and possibly another to run my LSiC from while I send my AV-705x amp to the shop to get refurbished.

I tried to do a search on this site, but searching M1.0t wont work and searching Carver M1 didnt really help either lol...

I am probably NOT going to do the MKII upgrade to either M1.0t but would potentially get them given the once over at a later date as well. My LSi's will have just the right amount of power from them without hotrodding them.

Anyone see a problem with pairing the 1.0t with the 705x? To start with I would be running the center off the 705x and then hopefully after some of my car audio stuff sells another 1.0t.

Also anyone ever paired a M series amp with a set of Maggies? Thinking about possibly another set to drive some MMG's or 1.6/1.7's
"You were on my Ignore List, but you are too damn entertaining, like a circus monkey, so I took you off" - H9
"We shouldn't laugh at people like you, we should pray for them. You have my prayers for a speedy rehabilitation you sad, silly little man" - Jstas
<<

jjptkd

User avatar

SILVER-7 TUBE AMP

Posts: 2887

Joined: Wed Sep 22, 2010 4:50 pm

Location: Snohomish, WA

Post Sat May 26, 2012 6:09 pm

Re: Carver M1.0t paired with a AV-705x

I've had the M-1.0t and liked it, lots here seemed to think they're better suited for subwoofer action. I would keep an eye out for the newer, A-400x to match your 705x. Same power rating as the M-1.0t but 15- 20 years newer. Plus, they're kind of "sleeper" amps and usually sell pretty cheap, mainly because of the lack of meters, plain-jane looking but same great sound as the larger versions. Good Luck!
Sunfire TGP-III
Sunfire 405x5
PS Audio DL-III DAC
(2 Pairs) Klipsch Chorus II's
Klipsch RSW 15
<<

EndersShadow

User avatar

TFM-45

Posts: 639

Joined: Thu Jun 30, 2011 3:58 pm

Location: Indiana

Post Sat May 26, 2012 6:28 pm

Re: Carver M1.0t paired with a AV-705x

jjptkd wrote:I've had the M-1.0t and liked it, lots here seemed to think they're better suited for subwoofer action. I would keep an eye out for the newer, A-400x to match your 705x. Same power rating as the M-1.0t but 15- 20 years newer. Plus, they're kind of "sleeper" amps and usually sell pretty cheap, mainly because of the lack of meters, plain-jane looking but same great sound as the larger versions. Good Luck!


Gracias. Its looking like my budget is around 250 so hopefully that can put me in 1.0t or whatever amp I need territory lol.....
"You were on my Ignore List, but you are too damn entertaining, like a circus monkey, so I took you off" - H9
"We shouldn't laugh at people like you, we should pray for them. You have my prayers for a speedy rehabilitation you sad, silly little man" - Jstas
<<

jjptkd

User avatar

SILVER-7 TUBE AMP

Posts: 2887

Joined: Wed Sep 22, 2010 4:50 pm

Location: Snohomish, WA

Post Sat May 26, 2012 6:34 pm

Re: Carver M1.0t paired with a AV-705x

The first A-400x I bought was near mint, paid less then $200 shipped off eBay. A friend of mine still has it and uses it everyday, great little amp. When I bought that amp I was running a 760x (380 wpc) in my main system. I swapped them out and could not hear a difference between the two, ended up selling the 760x after that. :? :?
Sunfire TGP-III
Sunfire 405x5
PS Audio DL-III DAC
(2 Pairs) Klipsch Chorus II's
Klipsch RSW 15
<<

EndersShadow

User avatar

TFM-45

Posts: 639

Joined: Thu Jun 30, 2011 3:58 pm

Location: Indiana

Post Sat May 26, 2012 6:35 pm

Re: Carver M1.0t paired with a AV-705x

jjptkd wrote:The first A-400x I bought was near mint, paid less then $200 shipped off eBay. A friend of mine still has it and uses it everyday, great little amp. When I bought that amp I was running a 760x (380 wpc) in my main system. I swapped them out and could not hear a difference between the two, ended up selling the 760x after that. :? :?


Yeah, I couldnt do a advanced search for that model and return any results :(. I will keep looking as you are correct, it looks just like my 705x. Does it also have those gay THX knobs on the back?
"You were on my Ignore List, but you are too damn entertaining, like a circus monkey, so I took you off" - H9
"We shouldn't laugh at people like you, we should pray for them. You have my prayers for a speedy rehabilitation you sad, silly little man" - Jstas
<<

jjptkd

User avatar

SILVER-7 TUBE AMP

Posts: 2887

Joined: Wed Sep 22, 2010 4:50 pm

Location: Snohomish, WA

Post Sat May 26, 2012 7:42 pm

Re: Carver M1.0t paired with a AV-705x

No gain controls, looks exactly like the TFM-35x on the rear panel, top covers are even universal. Found this thread:

viewtopic.php?f=8&t=7468
Attachments
DSCN5058.JPG
Sunfire TGP-III
Sunfire 405x5
PS Audio DL-III DAC
(2 Pairs) Klipsch Chorus II's
Klipsch RSW 15
<<

TNRabbit

User avatar

(pair of) SILVER-7 TUBE AMPs

Posts: 13303

Joined: Sun Jan 14, 2007 11:53 am

Location: TN Native Languishing in VA

Post Sat May 26, 2012 9:19 pm

Re: Carver M1.0t paired with a AV-705x

It's my understanding that the A series amps had more output devices....any truth to that?
TNRabbit
Image

From FrankieD's lips to your ears: Sunfire - a quiet box of endless power.

Sunfire TG-IV/400~7 Amp
Carver SD/A-360 CDP
Benchmark DAC-1
Sony SACD/DVD-A
Active bi-amp: Ashly XR-1001 & 2 Rane PEQ-15s
Main: HotRodded AL-IIIs
Sub: Klipsch RT-12d
Center: Sunfire CRS-3c
Surround: Sunfire CRS-3 (x 2)

OconeeOrange wrote:"Gary likes to play it 'loud' as do I. His system begs you turn it up until you die"

RIP WIlliam B. Dibble, 1948-2012. I'll miss you my friend.
<<

jjptkd

User avatar

SILVER-7 TUBE AMP

Posts: 2887

Joined: Wed Sep 22, 2010 4:50 pm

Location: Snohomish, WA

Post Sat May 26, 2012 9:30 pm

Re: Carver M1.0t paired with a AV-705x

Maybe on the larger amps. :-k There's 2 less per channel on the A-400x then the 35x but it's also rated 50 watts less per channel. That was the main difference I could see between the two models, otherwise near identical inside.
Last edited by jjptkd on Sat May 26, 2012 9:37 pm, edited 1 time in total.
Sunfire TGP-III
Sunfire 405x5
PS Audio DL-III DAC
(2 Pairs) Klipsch Chorus II's
Klipsch RSW 15
<<

jjptkd

User avatar

SILVER-7 TUBE AMP

Posts: 2887

Joined: Wed Sep 22, 2010 4:50 pm

Location: Snohomish, WA

Post Sat May 26, 2012 9:37 pm

Re: Carver M1.0t paired with a AV-705x

Pics of the insides:
Attachments
DSCN5056.JPG
DSCN5054.JPG
Sunfire TGP-III
Sunfire 405x5
PS Audio DL-III DAC
(2 Pairs) Klipsch Chorus II's
Klipsch RSW 15

Return to Carver Home (Audio)

Who is online

Users browsing this forum: No registered users and 3 guests

cron
Powered by phpBB © 2011 phpBB Group.