av806x

Carver Home Theater Discussions and Questions
Post Reply
kawika
Newbie
Posts: 3
Joined: Mon Jul 15, 2013 7:46 pm

av806x

Post by kawika » Fri Sep 20, 2013 1:52 pm

does any one know how to connect the av-806x to a yamaha rx-v767 receiver? I trying use the pre-out input on the rx-v767 to connect from the av-806x amp. Can anyone show or tell me where the R/L front, and R/L rear speakers wires goes into on the pre-out input pof the yamaha receiver??

User avatar
jjptkd
SILVER-7 TUBE AMP
Posts: 3049
Joined: Wed Sep 22, 2010 4:50 pm
Location: Snohomish, WA

Re: av806x

Post by jjptkd » Fri Sep 20, 2013 7:47 pm

The section labeled "Pre out" is were you need to hook to, bottom right inputs highlighted in white if you're looking at the rear of the unit.
Attachments
yam767rear.jpg

ddbroderick
Newbie
Posts: 27
Joined: Thu Mar 12, 2009 6:08 pm

Re: av806x

Post by ddbroderick » Tue Sep 24, 2013 6:54 am

Welcome to the forum.

You need to run RCA cables to connect the two. From the Yamaha connect the Front Left to Front Left or channel 1 on the Carver. Repeat for each channel so that all channels are connected (one at a time using RCA cables).

Run speaker wires from the Carver ONLY to your speakers. Turn on both and enjoy.

Post Reply

Return to “Carver Home (Theater)”