Rear binding post plate????

Carver Speaker Discussions and Questions
Post Reply
User avatar
Eddie
Eddie The Knife
Posts: 1799
Joined: Sun May 15, 2005 7:03 pm
Location: Valhalla! Expect me when you see me!

Rear binding post plate????

Post by Eddie » Thu Feb 04, 2010 3:49 pm

Who was it that had a link for a binding post plate to replace the one for the ALS's Plats. Thanks Eddie!
Don't waste a good opportunity to shut up!

Good judgment comes from experience, but experience usually comes from bad judgment.

The best thing is to learn from others that have mastered the one thing you need to learn!

I would tell you to go to hell but I already work there and I don't want to see your ugly face every day!

User avatar
BillD
R.I.P. Friend
R.I.P. Friend
Posts: 7126
Joined: Wed Jun 06, 2007 8:29 pm
Location: The west's most mid-western town, Scottsdale, Arizona

Re: Rear binding post plate????

Post by BillD » Thu Feb 04, 2010 4:01 pm

I can tell you what Reese and I did. He bought two pair of THESE binding posts, and he bought THIS binding post plate. We drilled two ½" holes between the two sets of binding plate holes on each plate and installed two FUSE HOLDERS for two MDQ-4 fuses.
It should sound like it isn't there!
There is a difference between hearing and listening...
Making life enjoyable through expensive electronics.
_________________
Carver: C-4000 & C-1 preamps, PSC-60 preamp/tuner, TX-11a tuner, M-400 (2), C-500, M-500, M-500t, M-500t Mk.II, A-500x, AL-III loudspeakers (2 pr.)
Sunfire:Theater Grand III processor, Ultimate Receiver, Cinema Grand Signature 400 ~ seven, True Subwoofer Mk. II, D-10 Subwoofer

User avatar
Eddie
Eddie The Knife
Posts: 1799
Joined: Sun May 15, 2005 7:03 pm
Location: Valhalla! Expect me when you see me!

Re: Rear binding post plate????

Post by Eddie » Thu Feb 04, 2010 5:10 pm

Thanks Bill!!!
Don't waste a good opportunity to shut up!

Good judgment comes from experience, but experience usually comes from bad judgment.

The best thing is to learn from others that have mastered the one thing you need to learn!

I would tell you to go to hell but I already work there and I don't want to see your ugly face every day!

User avatar
kingman
(pair of) SILVER-7 TUBE AMPs
Posts: 6383
Joined: Sun Nov 30, 2008 2:10 pm
Location: Upstate South Carolina

Re: Rear binding post plate????

Post by kingman » Thu Feb 04, 2010 5:37 pm

=D> =D> =D>
In reality, it only matters what it sounds like to YOU!!!

Post Reply

Return to “Carver Speakers”